Valor Offroad
V07 Graphite
Valor Offroad
V07
The V07 UTV wheel combines timeless styling with durable beadlock technology. Weighing in at 16.50 lbs, the 15x7" V07 is one of the lightest aluminum beadlock UTV wheels on the market.
The V07 beadlock UTV wheel is manufactured using only A356 aluminum with T6 heat treatment for one super strong wheel. Forged 6061 aluminum beadlock ring. Clean eight spoke design with debossed VALOR "V" logo. Offroad inspired and reinforced inner lip. Engineered to exceed SAE 2530 safety specifications. Bolt-on shorty center cap with embossed white logo.
Valor Offroad
Alpha on V07
Next level off-roading requires next generation products. The Alpha UTV tire by Valor Offroad was developed exclusively for the powersports industry. Made in the USA, tested in the Rocky Mountains, learn what makes The Alpha different from your current UTV tires.
INDUSTRY LEADING
LIGHTWEIGHT DESIGN
During the design phase, each Valor Offroad wheel is over-engineered to prevent unnecessary wear on your vehicle. The V07 is one of the lightest UTV specific wheels on the market today.
V07 15x7 = #16.50 lbs
V07 Detail
The Satin Black V07 beadlock UTV wheel and center cap are available in a satin black finish. The V07 billet beadlock ring comes out of the box in a gloss black paint finish. All Installation hardware is gloss black.
We take a lot of pride in designing products and finishes that will last you a lifetime of enjoyment. All Valor Offroad products undergo a barrage of brutal safety and quality assurance tests so that no matter where you ride, or whatever mother nature throws your way, we've got you covered.
Looking for a custom fitment or custom finish? Check out all of our Valor Offroad center caps here.
The V07 Beadlock UTV wheel is available in a 15x7 with fitments for either 4x137 or 4x156.
Not sure whether this wheel will fit your UTV, SxS or ATV, or unsure what all of this bolt pattern noise is all about? Give us a call and we will make sure you're good to go. After hours? No problem, check out this handy wheel fitment guide that should help address most common fitments.
We have a blog post dedicated to showing you step by step instructions on how to mount your Valor Offroad V05 UTV beadlock wheels. Check out the post here: How to install UTV beadlock wheels
Before airing your tires up, we recommend torquing each beadlock bolt to 18 ft lbs in a star pattern. Always use a quality torque wrench to ensure proper specification.
Each of our Valor Offroad UTV wheel styles is carefully wrapped in just the right amount of protective material to ensure a safe trip from our warehouse to your door. We are hyper selective in our packaging design and shipping to remove any unnecessary or redundant packaging.
Unless noted, your cap will match the finish of the wheel selection. Each cap includes all necessary installation hardware and will come pre-installed. See all Valor Offroad center caps.
All Valor Offroad beadlock wheels include all necessary mounting hardware on the bottom of the box. Please ensure you remove all packaging before descarding boxes.
Need lug nuts (installation kit)? Check out our full assortment of UTV wheel installation kits here or check out our fitment guide to figure out what Installation Kit you need.
Example: V07-1570P2556SG
V07: Style Number
15: Wheel Diameter
70: Wheel Width (7")
P25: Positive (+)25mm Offset
56: Bolt Pattern (4x156)
SG: Satin Graphite Finish
15" WHEEL SPECS
Size: 15x7
Bolt Pattern: 4x137
Offset: +25mm (5+2)
Hub Bore: 112mm
Wheel Weight (LBS): 16.50
Max Load (LBS): 1250
Finish: Satin Black
Ring Finish: Gloss Black
Cap: VCAP1-SHORTSB
Size: 15x7
Bolt Pattern: 4x156
Offset: +25mm (5+2)
Hub Bore: 132mm
Wheel Weight (LBS): 16.50
Max Load (LBS): 1250
Finish: Satin Black
Ring Finish: Gloss Black
Cap: VCAP1-SHORTSB
Size: 15x7
Bolt Pattern: 4x137
Offset: +25mm (5+2)
Hub Bore: 112mm
Wheel Weight (LBS): 16.50
Max Load (LBS): 1250
Finish: Satin Graphite
Ring Finish: Gloss Black
Cap: VCAP1-B-SHORTSB
Size: 15x7
Bolt Pattern: 4x156
Offset: +25mm (5+2)
Hub Bore: 132mm
Wheel Weight (LBS): 16.50
Max Load (LBS): 1250
Finish: Satin Graphite
Ring Finish: Gloss Black
Cap: VCAP1-B-SHORTSB
TECHNICAL DETAIL
FInish
The V07 beadlock UTV wheel is available in satin black paint or satin graphite with gloss black beadlock ring and gloss hardware.
QUALITY
Manufactured using only A356 aluminum with T6 heat treatment for one super strong wheel. Engineered to exceed SAE 2530 safety specifications.
Design
Timeless mesh eight spoke utv wheel design. Forged aluminum beadlock ring increases strength and sheds unecessary weight.
Safety
Strong 1250 lbs. load rating to ensure you get back to the trailhead or basecamp when you want to. Backed by a lifetime limited structural warranty.
BOLT-ON
SHORTY CAP
All Valor Offroad wheels comes stock with our industry first 15mm bolt-on shorty cap. Why run a bulky cap when you can have the shorty. We do offer a taller cap for those of you with special hub clearance needs, click below for our optional cap fitments.
Subscribe to Valor Newsletter
Promotions, new products and sales. Direct to your inbox.