




Valor Offroad
V02 UTV Wheel

Valor Offroad
V02
Dual-Drill for twice the fitment options. Learn more about why a dual drill wheel opens the door to endless fitment opportunities.
The V02 is manufactured using only A356 aluminum with T6 heat treatment for one super strong wheel. Super clean ten spoke design with debossed VALOR logo. Offroad inspired and reinforced inner lip. Engineered to exceed SAE 2530 safety specifications. Bolt-on shorty center cap with embossed white logo.

INDUSTRY FIRST
DUAL-DRILL WHEEL
A dual drilled UTV wheel is a wheel that is drilled with two sets of bolt holes. With this additional set of holes, dual drill wheels can accept two different bolt patterns. The V02 dual-drilled wheel has both 4x156 and 4x137 to fit both Polaris AND Can-Am as well as a handful of newer vehicles like the Kawasaki KRX and Honda Talon. One wheel, hundreds of fitments.
one wheel - two bolt patterns
FUNCTIONAL DESIGN
During the design phase, each Valor Offroad wheel is over-engineered to prevent unnecessary wear on your vehicle. The V02 is part of our Dual-Drill Collection, offering multiple bolt patterns on one wheel.
V02 14x7 = #13.45 lbs
V02 15x7 = #14.77 lbs
V02 Detail
The V02 is available in a semi-gloss satin black finish. The stock cap is also in matching satin black. The V02 is engineered with a dual-drill bolt pattern with inner ring in matching satin black paint finish and gloss black installation hardware.
We take a lot of pride in designing products and finishes that will last you a lifetime of enjoyment. All Valor Offroad products undergo a barrage of brutal safety and quality assurance tests so that no matter where you ride, or whatever mother nature throws your way, we've got you covered.
Looking for a custom fitment or custom finish? Check out all of our Valor Offroad center caps here.
The V02 is available in a dual-drill 4x137 and 4x156 bolt pattern.
Concerned whether this wheel will fit your UTV, SxS or ATV, or unsure what all of this bolt pattern noise is all about? Give us a call and we will make sure you're good to go. After hours? No problem, check out this handy wheel fitment guide that should help address most common fitments.
Each of our Valor Offroad wheel styles is carefully wrapped in just the right amount of protective material to ensure a safe trip from our warehouse to your door. We are hyper selective in our packaging design and shipping to remove any unnecessary or redundant packaging.
Unless noted, your cap will match the finish of the wheel selection. Each cap includes all necessary installation hardware and will come pre-installed. See all Valor Offroad center caps.
Need lug nuts (installation kit)? Check out our full assortment of UTV wheel installation kits here or check out our fitment guide to figure out what Installation Kit you need.
Example: V02-1470P1576SB
V02 Style Number
14: Wheel Diameter
70: Wheel Width (7")
P15: Positive (+)15mm Offset
76: Bolt Pattern (Dual Drill)
SB: Satin Black Finish
14" WHEEL SPECS
Size: 14x7
Bolt Pattern: 4x137 & 4x156
Offset: +15mm (5+2)
Wheel Weight (LBS): 13.45
Max Load (LBS): 1000
Finish: Satin Black
Cap: VCAP1-SHORTSB
15" WHEEL SPECS
Size: 14x7
Bolt Pattern: 4x137 & 4x156
Offset: +15mm (5+2)
Wheel Weight (LBS): 14.77
Max Load (LBS): 1000
Finish: Satin Black
Cap: VCAP1-SHORTSB

TECHNICAL DETAIL

FInish
The V02 wheel is available in a deep, satin black automotive grade paint with matching cap. Industry first dual-drill fitment in both 4x137 & 4x156.

QUALITY
Manufactured using only A356 aluminum with T6 heat treatment for one super strong wheel. Engineered to exceed SAE 2530 safety specifications.

Design
Clean ten spoke design with debossed VALOR logo. Matching inner ring. Offroad inspired and reinforced inner lip. Valor cap logo in white.

Safety
Strong 1000 lbs. load rating to ensure you get back to the trailhead or basecamp when you want to. Backed by a lifetime limited structural warranty.

Valor Offroad
V02 Inner Ring
Each V02 wheels comes with a super strong inner ring that protects your lugs from dirt and debris while offering you a unique opportunity to custom paint to match your vehicle's colorway. Each ring is held in place by two matching bolts. Use a 1/4" socket to remove the ring for easy access to your lugs.